Pitt Town, NSW 2756
Concreters Pitt Town
Concreting for Pitt Town homes and acreage, whether it’s a driveway for a new build, a shed slab, a pool surround or a large outdoor area. Pitt Town mixes newer estates with established rural blocks, and we work across both. Our crew handles excavation, formwork, reinforcement, the pour and the finish, so the result is consistent from start to end.
- LicensedNSW contractor licence 398552C
- Fully insured$20M public and product liability, plus workers insurance
- 13+ yearsHands-on in the concreting trade
- 5.0 on Google10+ five-star reviews
Who does concreting in Pitt Town?
Southo Concrete is a licensed concreting contractor working in Pitt Town, NSW 2756. We build driveways and crossings, shed slabs, hardstand, pool surrounds and outdoor areas for homes and acreage across Pitt Town, and we do the excavation and site preparation ourselves. Pitt Town is in the Hawkesbury local government area, and Hawkesbury City Council has to approve the driveway crossing between the road and your boundary. The same applies across Scheyville.
- Business
- Southo Concrete, NSW contractor licence 398552C, $20M public and product liability plus workers insurance
- Suburb
- Pitt Town, NSW 2756, Hawkesbury local government area
- Services
- Driveways and crossings, shed slabs, machinery slabs, hardstand, sandstone block retaining walls, pool surrounds, outdoor areas, excavation and site preparation
- Also covers
- Scheyville, plus the surrounding district
- Experience
- 13+ years in the concreting trade, 5.0 from 10+ Google reviews
- Quotes
- Free, and we aim to respond within 24 hours. Call 0468 491 882
Pitt Town, an 1810 town that’s growing again
One of Macquarie’s five towns, now half heritage village and half new estate. The jobs here range from new-home driveways to slabs on the old farmland near the river.
A Macquarie town on the river
Pitt Town, about 9 km from Windsor, is one of the five Macquarie Towns set up by Governor Macquarie in 1810 and is bounded to the north by the Hawkesbury River. Since 2010 much of the old farmland has become new residential subdivisions. Scheyville, just south, is known for its national park.
Source: Wikipedia locality entries: Pitt Town, Scheyville
Check your flood level before you pour
The Pitt Town bottoms, north of the town towards the river, are low floodplain. Infrastructure NSW puts the 1-in-100 (1% AEP) flood level at Windsor at 17.3 m AHD. Hawkesbury City Council issues flood advice for individual properties, including a Flood Planning Level used to set minimum floor levels. For a shed, studio or granny flat slab on low ground, get that advice first, because it can set the floor height before anything is formed up.
Source: Infrastructure NSW, Hawkesbury-Nepean Valley flood FAQ (March 2021); Hawkesbury City Council, Flood Advice
New-estate driveways
On the new estates, most work is the first driveway and paths after the builder hands over. We match the crossing to council’s levels, choose a finish that suits the house, and pour once the landscaping levels are settled, so nothing has to be cut back later.
Recent Southo projects
Recent work from across the Hawkesbury and the Hills, with the suburb named under each photo.


What we build out here
Driveways and the crossing at the road, shed and machinery slabs, hardstand and turning areas, retaining walls, pool surrounds and large outdoor areas.
Excavation included
We do our own cut, fill and base, so one crew handles the job from the first bucket to the final finish, and one price covers it.
Acreage, not patch-ups
Complete jobs on rural and acreage properties, where access, levels and drainage matter as much as the pour itself.
What goes under a Pitt Town driveway or slab?
Pitt Town sits on the ridge with the Bottoms below it, and the difference between the two decides almost everything about how a slab gets built.
-
The base under the slab
Hawkesbury City Council’s driveway specification sets the floor. Where the subgrade material is unsatisfactory, it has to be removed and replaced with a minimum of 150 mm of approved sandstone or road base material. On a non-granular subgrade, the slab is placed on a 25 mm layer of sand. On acreage that usually means more excavation than the same driveway would need on a suburban block.
Source: Hawkesbury City Council, Driveway Specifications — construction of driveway crossings
-
Fall, grade and width
The crossing has to fall at a minimum of 1:48 (2%) and a maximum of 1:12 (8%) from your boundary to the layback, with a minimum width of three metres at the kerb and gutter line. Where a street has no kerb and gutter, the gutter invert has to sit at least 2.2 metres back from the edge of the bitumen seal, with a heavy duty layback.
Source: Hawkesbury City Council, Driveway Specifications — construction of driveway crossings
-
How your block gets classified
Slabs and footings for a house or habitable building are designed to AS 2870, which classifies a site by how much the ground is expected to move with moisture — Class A and S are stable to slightly reactive, M moderately, H1 and H2 highly, and E extremely. The more reactive the ground, the more the design has to allow for it. That classification comes from a geotechnical soil test on your property, not from a suburb map, and no honest quote assigns one without it.
Source: AS 2870 Residential slabs and footings, AS 3600 Concrete structures, and the National Construction Code
Our concreting services
Driveways and crossings
Driveways for acreage and village blocks, with the crossing at the road built to Hawkesbury City Council’s driveway specification.
Concrete drivewaysShed slabs
Slabs for machinery sheds, workshops and American barns, sized and reinforced for what goes on them.
Shed slabsRural and acreage concrete
Hardstand, stable and feed areas, water tank bases, and sandstone block retaining walls where levels change.
Rural and acreage concretingExcavation and site preparation
We do our own cut and fill, which matters on the floodplain where how much earth you can move is controlled.
Excavation and site preparationPool surrounds and outdoor areas
Concrete around new and existing pools, and the large alfresco and entertaining areas these blocks have room for.
Pool surroundsDecorative and exposed aggregate
Coloured and exposed aggregate finishes for entries, courtyards and the run up to the house.
Decorative concrete
Driveway approvals in Pitt Town
A new driveway almost always includes the crossing between the road and your boundary. In Pitt Town that part sits on council land — and on this side of the river, how much earth you are allowed to move can matter just as much.
Lodge the agreement form first
Before any construction work starts, the owner or contractor has to complete and submit Hawkesbury City Council’s Agreement Form for Driveways with the required fee. Council also requires all contractors to carry public risk insurance with a minimum cover of $20 million and to show evidence of it before commencing.
Built to spec, and inspected
A minimum 100 mm of 25 MPa concrete with a single layer of SL72 mesh for residential, or 150 mm with two layers for heavy duty. Council carries out one inspection with the formwork and steel in place, on a minimum of 24 hours notice.
Source: Hawkesbury City Council, Driveway Specifications — construction of driveway crossings
If your land is flood affected
On the most hazardous flood-affected land, council’s controls say importation of fill and excavation are not permitted, other than a balance of cut and fill to create a level building platform or driveway access — and that cut and fill must not exceed one metre of cut or one metre of fill. A shed or other non-habitable structure must not be erected on that land below 0.3 metres under the Flood Planning Level, rising to 1.2 and 2.0 metres in the less hazardous categories.
Source: Hawkesbury City Council, Schedule of Flood Related Development Controls
Call for a free quote
Tell us about the driveway, shed slab or hardstand, and we’ll talk you through what the job involves.
Our customer reviews
Google reviews from customers across the Hawkesbury and the Windsor and Richmond area.
Nearby suburbs
We work right across the Windsor and Richmond fringe.
- OakvilleConcreters Oakville
- WilberforceConcreters Wilberforce
- WindsorConcreters Windsor
- SackvilleConcreters Sackville
See the whole Windsor and Richmond area, our rural and acreage concreting, or every service area.
Local FAQs
Anything else, call 0468 491 882.
Do you do concreting in Pitt Town?
Yes. We build driveways and crossings, shed slabs, hardstand, retaining walls, pool surrounds and outdoor areas for properties in Pitt Town and the surrounding district, including Scheyville, Oakville, Wilberforce and Windsor.
Can you do my driveway after the builder finishes in Pitt Town?
Yes. We regularly pour driveways, paths and alfresco slabs on new homes once the builder has handed over. Send us the site plan and a photo and we’ll quote the driveway, crossing and paths together.
Do you also cover Scheyville?
Yes. We treat Scheyville as part of the Pitt Town area and work across both with the same crew, the same site preparation and the same free on-site quote.
Do I need council approval for a driveway crossing in Pitt Town?
Yes. Pitt Town is in the Hawkesbury local government area. Before any work starts on the crossing between the road and your boundary, the owner or contractor has to lodge Hawkesbury City Council’s Agreement Form for Driveways with the required fee. Council also requires the contractor to carry public risk insurance with a minimum cover of $20 million and to show evidence of it before starting.
What does Hawkesbury council require a driveway crossing to be built to?
A minimum compressive strength of 25 MPa at 28 days in accordance with AS 3600. A residential crossing is a minimum 100 mm of concrete with a single layer of SL72 mesh; heavy duty is a minimum 150 mm with two layers. Reinforcement sits on bar chairs at a maximum of one metre spacing, about 25 mm below the finished level, and council inspects once with the formwork and steel in place, on 24 hours notice.
Can I bring in fill to raise a slab or pad in Pitt Town?
Only within limits, and only if your land is flood affected in the first place. On the most hazardous flood-affected land, council’s controls say importation of fill and excavation are not permitted other than a balance of cut and fill to create a level building platform or driveway access, and that cut and fill must not exceed one metre of cut or one metre of fill. A shed or other non-habitable structure must not be erected on that land below 0.3 metres under the Flood Planning Level, rising to 1.2 and 2.0 metres in the less hazardous categories. Council’s Flood Advice gives you the Flood Planning Level for your property in metres AHD, and an accurate ground level needs a survey by a registered surveyor.
How much does a concrete driveway cost in Pitt Town?
It depends on the length, how much excavation and base preparation the ground needs, whether an old surface comes out, the crossing at the road, and the finish. On the floodplain it can also depend on how much earth you are permitted to move. The accurate number comes from seeing the site, and quotes are free.
What’s underneath a Pitt Town driveway or slab?
Council’s specification is the floor: where the subgrade material is unsatisfactory it has to be removed and replaced with a minimum of 150 mm of approved sandstone or road base, and on a non-granular subgrade the slab is placed on a 25 mm layer of sand. Beyond that, a site classification under AS 2870 comes from a geotechnical soil test on your block, not from a suburb map.
Is a job in Pitt Town Bottoms different from one up in the village?
It can be. The flood plan names the Bottoms as low-lying, and council’s flood controls set minimum levels for structures and limit how much fill can be brought onto the most hazardous land. Up in the village those controls may not bite at all. The honest answer for any particular block comes from a Flood Advice from council, not from which side of the suburb it’s on.
Are you licensed and insured?
Yes. Southo Concrete holds NSW contractor licence 398552C and a general construction induction white card, and carries $20 million public and product liability cover plus workers insurance. Certificates of currency are available on request, along with SWMS where a site needs them, and we can complete site inductions as required.
How long will the concrete last, and will it crack?
We use high-quality materials and proven construction methods to help ensure our work lasts for 25 years or more. We also use appropriate materials and techniques to control cracking in our slabs, helping to keep it very limited, if not eliminate it altogether. Please note that cracking can be affected by factors outside our control, including ground movement, weather and site conditions.
Do you do small concrete repairs in Pitt Town?
No. We take on complete jobs — driveways, shed slabs, hardstand, retaining walls, pool surrounds and outdoor areas — where we control the work from excavation through to finish. We don’t do small patch-up repairs.
Accuracy note
Local information on this page — council requirements and site conditions — is taken from public sources including Hawkesbury City Council’s driveway specification, its Schedule of Flood Related Development Controls and its Flood Advice information, its suburb boundary maps, the Hawkesbury City Local Flood Plan, and Australian Standards AS 2870 and AS 3600, and was checked on . Rules and mapping change. If anything here is inaccurate or out of date, please email southoconcrete2@outlook.com and we’ll correct it. Nothing on this page is advice for a specific property.